Explanation of Production

1. The equipment is four post jolt squeeze shaping brick machine. Suppression can be vertical Stone curbs.
2. It realized the merit of shaping several bricks once.
3. It is auto carry plate, come out plate, aggregate and face material pressing
4. One-of remolding several bricks holistically, which realized concentrically portage and stoking, improves production efficiency
5. The mold can be changed to realize diversification of one machine
6. The equipment is only used plate of ten bricks, which can pre-as bricks and realized damped stoking
7. Chassis integration, easy installation, and trial run lower failure rate;

Main

technical parameters

1. Forming design speed 2.5 times minute;
2. Once shaping number 4bricks(390×190x190mm);
3. Output in 8 hours 67m3 team;
4. Exciting force 68KN;
5. Frequency of shock 5000 time minute;
6. Amplitude 15mm;
7. Maximal pressure 10MPa;
8. Maximal product specification 995x400mm;
9. Installed capacity 20.7Kw;
10. Weight 6385kg;
11. External dimension 1720*1360*2480mm.

Disposition

The main engine, the pumping station, the lining machine, will bring the bunker, the Dexter feeder, the brick machine, the conveyer, the toolbox, the fitting, the bamboo off-set, (1020*550*25) 20, the instructions for use, to maintain the card, the product payment list, two board car 4

Note

Raw material: Construction trash, pulverized coal ash, river sand, cement,