Model

XSF-Z1000E        

Explanation of Production

1、The equipment is four post jolt squeeze shaping brick machine．Suppression can be vertical Stone curbs.

2、It realized the merit of shaping several bricks once．

3、It is auto carry plate，come out plate，aggregate and face material pressing．

4、One-of remolding several bricks holistically，which realized concentrically portage and stoking，improves  production  efficiency．

5、The mold can be changed to realize  diversification  of one machine．

6、The equipment is only used plate of ten bricks．which can pre-as bricks and  realized damped stoking．

7、Chassis integration, easy installation, and trial run lower failure rate.

Main

technical parameters

1、Forming design speed：2.5 times／minute
2、Once shaping number：4bricks(390×190x190mm)
3、Output in 8 hours：67m3／team
4、Exciting force：68KN
5、Frequency of shock：5000time／minute
6、Amplitude：15mm
7、Maximal pressure：10MPa
8、Maximal product specification：995x400mm
9、Installed capacity：20.7Kw
10、Weight：6385kg
11、External dimension：1720*1360*2480mm

Standard layout

The main engine, the pumping station, the lining machine, will bring the bunker, the Dexter feeder, the brick machine, the conveyer, the toolbox, the fitting, the bamboo off-set, (1020*550*25) 20, the instructions for use, to maintain the card, the product payment list, two board car 4。

Note

Raw material: Construction trash, pulverized coal ash, river sand, cement, gravel, gangue.